Frame Reinforcement & Screw Kit JP0008 – Polaris Sportsman/Scrambler
$231.00
JAY PARTS Frame Reinforcement & Screw Kit, Polaris Sportsman/Scrambler
Oval holes, bent tabs, broken frames are a thing of the past with the kit!
Including Jay Parts screw kit – original screws are too short!
- 3mm steel with KTL coating
Polaris Scrambler 850 | 2013+
Polaris Scrambler 1000 | 2013+
Polaris Sportsman 850 | 2009+
Polaris Sportsman 1000 | 2009+
14 screws 8.8 galvanized and 10.9 geomet
14 nuts
28 washers M10
2 washers for compensation/distancing
In stock
1 - 7 days shipment
JAY PARTS Frame Reinforcement & Screw Kit Polaris
Please check Model/Year!
Frame Reinforcement Kit 12 pieces + Jay Parts Screw Kit for Polaris Sportsman and Scrambler 850/1000 with KTL coating.
The kit strengthens spots and fracture vulnerable areas with 3mm thick plates.
"Oval holes, bent tabs, broken frames are a thing of the past with the kit!"
Including Jay Parts screw kit - original screws are too short!
MATERIAL:
- 3mm steel with KTL coating
Made in Europe
California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
Instruction
With the help of the supplied plan, you can determine where each reinforcement plate should be placed and installed. You can also see which bolts should be used where.
However, I would like to say a few words about the Jay Parts screw kit.
The original screws are unfortunately too short and rub with the thread in the frame oval holes and damage the frame (see photo with green frame).
For this we have measured a special screw kit.
Unfortunately, we also have to comply with standards. However, we make sure that the shaft of the screw is guided in the frame guides.
With the 4mm thick washers we have on the one hand an additional reinforcement and on the other hand a guide to avoid oval holes or if already present to react well to it. By the measure the screws appear too long. You can cut off the protruding thread (for the sake of appearance) but keep in mind that the screws can then rust.
IMPORTANT:
Do not forget to grease the vehicle after assembly!
Grease the screws also, that they are protected in the long term against corrosion.
TORQUE:
Front axle 54 NM
Rear axle 61 NM
Warranty & Returns
JAY PARTS USA Inc. offers products from premium manufactures and we strive to provide our customers with the best service and warranty.
Please note: All products are warrantied to the original purchaser only.
Be sure to inspect your packages for any damage at time of delivery.
Please check out the details of our Warranty Policy and our warranty claims process before sending a claim to us.
Weight | 8.9 lbs |
---|---|
Dimensions | 16 × 6 × 4 in |
Brand | JAY PARTS |
Reviews
There are no reviews yet.