JAY PARTS Bell Crank Stainless Steel JP0018 - Polaris

POLARIS Sportsman 550/850/1000/1000 S (55"), Scrambler 850/1000/1000 S (55")
Please check Model/Year!

If the original Polaris bell crank made of aluminum wears out no gears go to switch. You should at least put the stainless steel bellcrank from JAY PARTS in the tool box.

FEATURES
- 6mm stainless steel
- polished
- Made in Europe

California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Instruction

Installation Instruction for JAY PARTS Bellcrank Stainless Steel – Polaris

Remove the seat and remove the right side panel. First open the upper nut 13mm – then open the 10mm nut (10mm at the back and the front). We prefer the H position when dismantling.

Carefully pry down the original lever with a fixed screwdriver.

Here at the black dot you can see the wide tooth that specifies the position of the lever.

Then tighten the shift linkage with the screw and the original self-locking nut, 10mm screw and nut with 12NM. Now assemble the right side parts and the seat.

Before starting up again, check whether your ATV can be shifted with normal power.

Warranty & Returns

JAY PARTS USA Inc. offers products from premium manufactures and we strive to provide our customers with the best service and warranty.
Please note: All products are warrantied to the original purchaser only.

Be sure to inspect your packages for any damage at time of delivery.

Please check out the details of our Warranty Policy and our warranty claims process before sending a claim to us.

Contact us and we will reply as soon as Possible!

Bellcrank Stainless Steel JP0018 - Polaris