JAY PARTS Bushing & Sleeves Kit A-Arms front - Polaris

POLARIS Scrambler 850/1000, Sportsman 850/1000
Please check Model/Year!

The sleeves are made of vacuum hardened and ground stainless steel, only the best is good enough for our claim!

For the bushings, PE-GL with oil additive was preferred as a wear-resistant material, to ensure all-round lubrication, we have an inner spiral groove as optimal. An O-ring provides sealing against dirt and water.

FEATURES
- Made in Europe
- vacuum hardened stainless steel sleeves
- stainless
- bushing PE-GL
- spiral groove inside
- sealed with O-rings

California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Instruction

Installation Instruction for JAY PARTS Bushing & Sleeves kits

Do not hit the bushings with a hammer!

Use plenty of grease during installation, i.e. apply it to the bushings beforehand.
During subsequent greasing, apply grease only until the grease gun detects the first resistance. The grease must not leak out!

The bushings fit exactly and the O-rings seal against water and mud, therefore the grease cannot leak out! If you apply grease more than until you feel first resistance, you will blow up the bushing.

Warranty & Returns

JAY PARTS BUSHING AND BUSHING & SLEEVES KITS LIMITED WARRANTY STATEMENT JAY PARTS USA Inc. offers products from premium manufactures and we strive to provide our customers with the best service and warranty. Please note: All products are warrantied to the original purchaser only. Be sure to inspect your packages for any damage at time of delivery. Please check out the details of our Warranty Policy and our warranty claims process before sending a claim to us.

Contact us and we will reply as soon as Possible!

Bushings & Sleeves Kit A-Arms rear JP0023 - Polaris