JAY PARTS Bushing & sleeves kit A-Arms Can Am 12-

CAN AM Commander, Defender, Maverick, Outlander, Renegade, Traxter
Please check Model/Year!

The sleeves are made of hardened stainless steel, only the best is good enough for our claim!
For the bushings PE-GL with oil additive was used as a self-lubricating wear-resistant material which are provided with a inner spiral groove. Sealing against dirt and water takes over an O-ring.

RECOMMENDATION
Always swap both sides, as there is a big difference in quality compared to the original spare parts.

FEATURES
- Made in Europe
- hardened stainless steel
- bushings PE-GL with oil additive and inner spiral groove
- sealed with O-rings
- stainless steel wear washers

California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Instruction

Installation Instruction for JAY PARTS Bushing & Sleeves kits

Do not hit the bushings with a hammer!

Use plenty of grease during installation, i.e. apply it to the bushings beforehand.
During subsequent greasing, apply grease only until the grease gun detects the first resistance. The grease must not leak out!

The bushings fit exactly and the O-rings seal against water and mud, therefore the grease cannot leak out! If you apply grease more than until you feel first resistance, you will blow up the bushing.

Warranty & Returns

JAY PARTS BUSHING AND BUSHING & SLEEVES KITS LIMITED WARRANTY STATEMENT JAY PARTS USA Inc. offers products from premium manufactures and we strive to provide our customers with the best service and warranty. Please note: All products are warrantied to the original purchaser only. Be sure to inspect your packages for any damage at time of delivery. Please check out the details of our Warranty Policy and our warranty claims process before sending a claim to us.

Contact us and we will reply as soon as Possible!

Bushing & Sleeves Kit A-Arms JP0149 - Can Am 12-