JAY PARTS Bearing Clamp Steering JP0155 - Polaris S

POLARIS Scrambler 1000 S, Sportsman 1000 S
Please check Model/Year!

Sturdy aluminum bearing clamp in combination with the special bushing made of a highly abrasion-resistant and self-lubricating plastic are used at Jay Parts. The bushings are equipped with a spiral groove, so as to distribute the grease optimally over a grease nipple on the entire bearing surface. This prevents the ingress of water and dust.

IMPORTANT
If the bearing surface of the steering column is already worn (metal abrasion present), even our system will not bring any improvement. In this case we also recommend a new steering column.

FEATURES
- Made in Europe
- Aluminum bearing clamp
- Highly abrasion resistant and self-lubricating plastic bushing
- Lubrication possible
- minimized wear
- increased stability and safety
- Best possible material and ideas composition

California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Instruction

Installation Instruction for JAY PARTS Bearing Clamp Steering POLARIS S

The following tips are for self-assembly!

For mounting the bearing clamp steering:

• we recommend the remove oft he front cover
• remove the 2 screws of the fuse box
• remove the 2 crews oft he ECU mounting plate (control unit) from the frame
• the mounting plate is no longer installed, so remove it from the ECU
• 
  remove the 2 screws oft he original bushing holder and remove it
• to insert the Jay Parts bearing clamp steering release the steering column, do not exert too much pressure on the steering column
• to install the ECU, use the supplied rubber to clamp the ECU onto the airbox
• when mounting the bearing clamp steering use sufficient water-resistant grease in the bushing
• to install the grease nipple, use the hole provided by Polaris. The supplied grease nipple has a self-tapping thread (no thread cutting necessary).

When assembling, make sure that no cables are clamped and that all components are mounted without tension.

Torque M8 screws: 25 NM
Torque M5 screws: 7 NM

RECOMMENDATION
For lubrication we recommend Waterproof Grease, to protect the bearing points on your entire vehicle.

NOTE
If the steering is stiff after the mounting the new bearing clamp steering, loosen the nuts by half a turn.

IMPORTANT
If the surface oft he steering stem is already closed (there is metal abrasion), our system does not improve either. We recommend a new steering stem.

Warranty & Returns

JAY PARTS BEARING CLAMP STEERING LIMITED WARRANTY STATEMENT

JAY PARTS USA Inc. offers products from premium manufactures and we strive to provide our customers with the best service and warranty.
Please note: All products are warrantied to the original purchaser only.

Be sure to inspect your packages for any damage at time of delivery.

Please check out the details of our Warranty Policy and our warranty claims process before sending a claim to us.

Contact us and we will reply as soon as Possible!

Bearing Clamp Steering JP0155 - Polaris S (55")