JAY PARTS Tie Rod Ends Performance Polaris Scrambler 1000 S (55") & Polaris Sportsman 1000 S (55")

Please check Model/Year!

Tie rod ends inside and outside Performance with modified shaft design with a lager ball joint and optimized shaft. he construction of the tie rod ends is specially designed for the toughest loads!
Due to the perfect fit and highest quality material selection, our tie rod ends are the most stable you can buy.

For one vehicle 2 sets are needed.

IMPORTANT
Make sure to use threadlocking adhesive (Loctite 243 threadlocker) medium strength during assembly.

Made in Europe.

California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Instruction

Installation Instruction for JAY PARTS TIE ROD ENDS JP0166 – Polaris S

Please make sure that the washers are enclosed both above and below!
Make sure to use threadlocking adhesive (Loctite 243 threadlocker) medium strength during assembly and tighten the tie rod ends with the manufacturer’s specification +5 NM / 44 lb-in!
Use the nut or crown nut with splint pin as required for assembly.

ATTENTION

For aftermarket rims that increase their offset inward, make sure that the tie rod end and rim do not come into contact when turning from left to right!

Warranty & Returns

JAY PARTS TIE RODS & TIE ROD ENDS LIMITED WARRANTY STATEMENT

JAY PARTS USA Inc. offers products from premium manufactures and we strive to provide our customers with the best service and warranty.
Please note: All products are warrantied to the original purchaser only.

Be sure to inspect your packages for any damage at time of delivery.

Please check out the details of our Warranty Policy and our warranty claims process before sending a claim to us.

WARRANTY & RETURN POLICY

Contact us and we will reply as soon as Possible!

Tie Rod Ends Performance JP0166 - Polaris S (55")